DISCIPLIGN, when built into conveyors or special machinery, provides accurate, continuous, automatic alignment of wide, flat belts.

DISCIPLIGN is completely mechanical and self energized, no external power source is required.

DISCIPLIGN is especially suited for use on belt systems of short head-to-tail center distances ranging from less than two feet to 30 feet or more and widths to 96 inches or wider.

DISCIPLIGN reduces costly belt maintenance and downtime by minimizing edge wear.

DISCIPLIGN provides precision guiding of payload.

The RJS NOSE GUIDE ASSEMBLY combines a conveyor nose bar with the RJS Disciplign Belt Guide to provide in one package a self-energized belt-guiding nose bar.

Supplied assembled to any belt width ranging from 12 inches (305mm) to 52 inches (1321mm) as selected by the end user, NOSE GUIDE ASSEMBLY provides a convenient means for the conveyor designer to incorporate a nose bar into his conveyor system either as a retrofit or in a new design and thereby minimize the problem of off-tracking of the belt.

NOSE GUIDE ASSEMBLY for belt widths exceeding 52 inches (1321mm) will be considered on a case by case basis.

Intended for operation with thin belts, the NOSE GUIDE ASSEMBLY is provided with a Size 3 Disciplign Guide especially designed for good response to such belts.  The belt may travel in either direction.